Polished shaft rolling ring traverse4 drives includs 3-bearing and 4-bearing
1. Stepless adjustment
the take-up reel transfers a certain speed to the polished shaft.Without changing the rotating speed of the shaft , only by moving the indicator on the scale dial, adjusting the traverse driver's speed of reciprocating motion on the shaft, rang from 0 to the Max. pitch.
2. Instantaneous reversal
with no need to change the shaft speed of rotation, when the reversal trigger roller contacts the end stop, the moval dirction of the traverse driver will be pivoted to its mirror direction with revesal time of not more than 1 second.
3. High traverse speed
THE traverse drive speed of liner motion on the shaft can be up to Max 0.4m/sec. and the applicable speed is usually 0.3m/sec. so it can meet the requirement fo some situations for high traverse speed and frequent reversal.
4. Release assembly
The traverse drive features the release system. it allows the rolling rings to disengage from the shaft wihtout the shutdown and can be manually moved at any position on the shaft, it can be traverse from the end part.
1 no space ,no noise
2 transmission of high effieiency, low operating loss
3 security, it can be slippery automatically of overloaded, do not damage other components
4 The same shaft at the same time can have a left tooth and a right tooth design
5 the eccentric release lever can be added and the dirve can be freely moved on the shaft when the lever is released.
6 dustproof, antipollution and high airproof.
7 the standard pitch for the shaft diameter is 0.5 or shaft diameter 0.4, 0.3, 0.2,0.1 special needs can be met, according to customer's request.